Can anyone using a Burny Phantom control for cnc plasma cutters tell me where I can control the lead-in-out cut pattern? For example: when burning a .590Ø hole I want to lead straight into the circle from the center, and lead out with an arc. I'm trying to minimize the distortion from the pierce points to achieve a cleaner more uniform hole.
Best bet is to contact Burny directly. If you are cutting standard shapes from the internal files in the control...then this is a function that can be handled at the control. If you are using a CAM nesting software...the controlling lead ins and lead outs is done during the part nesting process in the software.
Jim Colt Hypertherm