cnc time setting

[subshri]

hi all,
i'm new to cnc. i'm using a fanuc series oi mate-tc. just want to know how to change the system time and date settings.
any reply will be appreciated

[cossiegaz]

I operate a Fanuc Oi-MC, to change the time and date on this you have to be in M.D.I mode, then press OFFSET on the control panel, then press the [SETTING] softkey, then page down until you come to a page which has among other things the date and time displayed on it, you can then alter it from there.
This is for a Fanuc Oi-MC controller so i dont know if yours is the same.

[subshri]

I operate a Fanuc Oi-MC, to change the time and date on this you have to be in M.D.I mode, then press OFFSET on the control panel, then press the [SETTING] softkey, then page down until you come to a page which has among other things the date and time displayed on it, you can then alter it from there.
This is for a Fanuc Oi-MC controller so i dont know if yours is the same.

hi,
thanks for your reply, i'll try this and see how it goes.
regards,
shri