Results 1 to 4 of 4

Thread: Memory Batteries AM1

  1. #1
    Registered
    Join Date
    Dec 2007
    Location
    London
    Posts
    80
    Downloads
    0
    Uploads
    0

    Memory Batteries AM1

    Hello, my controller specifies Alcaline Magnesium Dioxide batteries (AM1) and I have been told that they are just industrial grade alkaline batteries.

    Can someone confirm this or recommend something better.

    The old batteries were quite nasty and leaking acid so they should at least be better for now.

    cheers


  2. #2
    Registered
    Join Date
    Jun 2004
    Location
    United States
    Posts
    40
    Downloads
    0
    Uploads
    0
    TADIRAN part number TL-5242/W 3.6 volts HIGH ENERGY LITHUM BATTERY phone number 1-800-433-5700 or www.alliedelec.com is the dealer I purchased mine from. The Anilam controller that is in my machine had one installed. This battery comes in a case with pig tailed wire that plugged in to the computer board. Oh yes my controller also had the remains of an old battery box that was quite nasty. Someone left the junk in there<grin>

    Have a great day


  3. #3
    Registered
    Join Date
    Dec 2007
    Location
    London
    Posts
    80
    Downloads
    0
    Uploads
    0

    D Cell

    Hey, thanks for the reply. I should have said that I replaced the batteries with D-cells as they were the same size and voltage.

    I am wondering if D lithium would be better although I don't know if they exist. I will check out your link

    thanks


  4. #4
    Registered
    Join Date
    Dec 2007
    Location
    London
    Posts
    80
    Downloads
    0
    Uploads
    0

    LInk

    That link showed a panasonic D-cell when I searched for AM1 as a part number for the item.

    I should be ok with the Alcalines that I purchased at the electronics supply but will pick up panasonic replacements if the voltage on them does not hold up.

    thanks


Similar Threads

  1. Fanuc 10M Parameters...no batteries
    By spank in forum Fanuc
    Replies: 3
    Last Post: 03-29-2011, 03:56 AM
  2. Old t1 control lathe and 4 "aa" batteries
    By carbidecraters in forum Mazak, Mitsubishi, Mazatrol
    Replies: 6
    Last Post: 03-05-2008, 06:13 PM
  3. DT-Center Batteries ??
    By scott1980 in forum General Metal Working Machines
    Replies: 0
    Last Post: 05-02-2007, 10:21 AM
  4. R2E3 batteries?
    By sharp-shooter in forum Bridgeport and Hardinge Mills
    Replies: 6
    Last Post: 11-19-2006, 11:02 PM
  5. 88 Memory ?
    By Bear in forum Fadal
    Replies: 2
    Last Post: 09-01-2006, 07:26 AM

Posting Permissions


 


About CNCzone.com

    We are the largest and most active discussion forum from DIY CNC Machines to the Cad/Cam software to run them. The site is 100% free to join and use, so join today!

Follow us on

Facebook Dribbble RSS Feed


Search Engine Friendly URLs by vBSEO ©2011, Crawlability, Inc.