Results 1 to 4 of 4

Thread: dynapath s10 help

  1. #1
    Registered
    Join Date
    Sep 2007
    Location
    Canada
    Posts
    40
    Downloads
    0
    Uploads
    0

    dynapath s10 help

    Hi I have a dynapath s10 and the 3 fans for the unit died one by one while the machine was running, the monitor had issues turning on sometimes and it gradually got worse and worse, didn't know what was causing the issue until all 3 fans were dead. Now the monitor will not turn on at all. All th fan have been replaced and work fine, tracked the crt back into the peripheral board and look like 3 chips have some heat scoring on th ship. I have the schematic but I don;t know how to read them. Wondering if anyone has or knows where I could find a spare board. Theres one on ebay but its $500, I'd like to find one cheaper if I could but if not I'll bite the bullet.

    Wondering if anyone has had a similar experience or not. The card # is4200547 E
    Thanks guys


  2. #2
    Registered
    Join Date
    Sep 2007
    Location
    U.S.A.
    Posts
    9
    Downloads
    0
    Uploads
    0

    Found another same price but...

    Maybe you can call em' and haggle.. If your sharp enough to do all that surely you can get em' to come off the goods at a discount. I don't see alot of activity across the internet in reference to that problem you had so I would just guess it's not a real "hot" item right now... Sorry I'm punny like that sometimes.
    Address :
    NC Systems, Inc.
    945 S. Westwood Ave.
    Addison, IL 60101
    USA

    Phone 630-543-4343
    Fax 630-543-6906
    E-mail info@n-c-systems.com

    Business Hours Monday through Friday 8:00 - 5:00 CST
    Hope your pulling the trigger soon....
    Regards,
    T.


  3. #3
    Registered
    Join Date
    Sep 2007
    Location
    Canada
    Posts
    40
    Downloads
    0
    Uploads
    0
    One of my guys gave them a call, no luck on budging on the price.

    Came across a s10 peripheral board but with a different #, this one is 4200802B
    The one in my machine that we believe is bad is 4200547E
    The other one that we found that costs about 10 times as much as the 4200802b is a 4200547G.

    Heres a pic of the 4200802B:


    And a picture of the 4200547G:


    And my current 4200547E:


  4. #4
    Registered
    Join Date
    Sep 2007
    Location
    Canada
    Posts
    40
    Downloads
    0
    Uploads
    0
    Is this the right forum for this topic? Or is this kind of like some black art stuff where no one wants to talk about it? I'm really looking for some advice this really new to me.


Similar Threads

  1. DNC w/Dynapath Delta 20
    By rr167 in forum Machine Problems, Solutions , Wireless DNC, serial port
    Replies: 17
    Last Post: 07-01-2011, 08:46 AM
  2. Dynapath 20 Download
    By CharlesM479 in forum BobCad-Cam
    Replies: 2
    Last Post: 02-28-2007, 08:51 PM
  3. dynapath delta 10 help
    By undertowx in forum General CNC (Mill and Lathe) Control Software (NC)
    Replies: 2
    Last Post: 07-05-2006, 10:49 AM
  4. dynapath stuck
    By kurth in forum Machine Problems, Solutions , Wireless DNC, serial port
    Replies: 4
    Last Post: 01-24-2006, 09:35 AM
  5. drilling with dynapath 40
    By lynchee in forum General CNC (Mill and Lathe) Control Software (NC)
    Replies: 2
    Last Post: 11-28-2005, 12:51 PM

Posting Permissions


 


About CNCzone.com

    We are the largest and most active discussion forum from DIY CNC Machines to the Cad/Cam software to run them. The site is 100% free to join and use, so join today!

Follow us on

Facebook Dribbble RSS Feed


Search Engine Friendly URLs by vBSEO ©2011, Crawlability, Inc.