Help needed with Edgecam postprocessor for Kosy A5

[Jogge]

The school where I'm teatching CAD and CAM has recently finally obtained a CNC machine, a small Kosy A5 mill. I haven't had any luck with the postprocessor I'm writing for this little thing, my biggest concern right now is how I could get the Code Wizard to repeat the words at the beginning of every line, here's a short example of the code accepted by Kosy A5:

;MALLI_KOSYSETUP_ONE.NCC 2/16/2006
;RENSI FINLAND
;- -, - -, - -
G90
G76
M10 O6.1
G00 X5. Y130.
G00 Z25.
G00 Z2.5
G01 Z-5. F27
G01 Y20. F53
G03 X20. Y5. I15. J0
G01 X130.
G00 Z25.
M10 O6.0
G76
G00 X0 Y0
M05
M10 O6.1
G00 Z25.
G00 X5. Y130.
G00 Z2.5
G01 Z-5. F27
G01 Y20. F53
G03 X20. Y5. I15. J0
G01 X130.
G00 Z25.
G00 X5. Y130.
G00 Z-2.5
G01 Z-10. F27
G01 Y20. F53
G03 X20. Y5. I15. J0
G01 X130.
G00 Z25.
M10 O6.0
G76
G00 X0 Y0
M05
M10 O6.1
G00 Z25.
G00 X25. Y65.
G81 Z20. B22.5 F31
G79 X25. Y65. Z0
G79 X75.
G00 Z25.
M10 O6.0
G77
G99

I am able to get rid of the line numbers and I'm also able to get most of the other things right but my testing has come to a halt because of this. Any advises?

[pcms1965]

Go to the EdgeCAM users group. There are some very knowledgeable edgecam users in that forum. you can access the group by going to www.pceaze.com.