I have a problem with CNC Lathe Gildemeister NEF400 EPL, the G01 code doesnít work, when the machine in a manual running mode G00 it works, but as soon as it moves to automatic mode G01 the spindle works but the cutting head doesnít move (Z & X) stops totally, the machine operator did all the kind of program check everything looks fine, Iím attaching 2 pictures for the machine and the controller.
Machinetype CNC Lathe
Make GILDEMEISTER (Year 1983)
Type NEF400 (No. 68094)
167-30-0100 / 016
You could check that the control is seeing the "spindle at speed" signal from the spindle drive.
Most controls will let an axis rapid but not feed unless they know the spindle is at the programmed speed.