| | |
I have not been able to locate any information after hours of searching everything seemingly possible on the internet. I actually have the older 4th axis built in style-board but I assume the pinouts for the main axis' should be the same.
This is the Chinese board sold by Virtual Village. If anyone has a link to a manual or at least the pinout information for the "Tonsen TS-3+1X" driver board I would greatly appreciate it. Also this thread will come up immediately for anyone searching so it should make things easier for everyone.
This is the board in question:
Last edited by 2000ZxT; 03-27-2011 at 12:06 PM.
Answered my own question. 007807-097 | downloads.virtualvillage.com
Finally got it working, the directions are pretty awful but it is proving to be a decent board.
Last edited by 2000ZxT; 03-29-2011 at 11:32 PM.
Posting Permissions
| | |
LinkBack URL
About LinkBacks
