330 Emergency stop wont clear!

[PepeUSMC]

I am a CNC UBER_NOOBIE.... Just starting to get my feet wet... I have a old kuraki Kv 500 with yasnac mx1 control and I jogged to Y axis to the limit switch and I dont know how to clear the 330 emergency stop and move the y travel back inside its limits.... PLEASE HELP!!!

Thanks!

[dcoupar]

I am a CNC UBER_NOOBIE.... Just starting to get my feet wet... I have a old kuraki Kv 500 with yasnac mx1 control and I jogged to Y axis to the limit switch and I dont know how to clear the 330 emergency stop and move the y travel back inside its limits.... PLEASE HELP!!!

Thanks!

If you can't find an OT Release button somewhere... in the "old" days, we sometimes had to shut down the machine and manually turn the screw to get off the switch. Sometimes this required removing the way covers.