| |
| Home Page | Mark Forums Read | Today's Posts | My Replies | Classifieds | Reviews | Photo Gallery | Web Links | Share Files | Advertise With Us | Ad List |
| |||||||
| General CNC (Mill and Lathe) Control Software (NC) General Discussion of CNC (Mill and Lathe) control software here! |
| | |
| This forum is sponsored by: |
 |
| | LinkBack | Thread Tools | Search this Thread | Display Modes |
|
#1
 
03-21-2009, 12:09 PM
| |||
| |||
I'm working on a Toyoda HMC with a pair of Sany Denki drives for the magazine and the ATC arm. The one for the magazine has come up with a warning that states "the ON/OFF cycles in the Non-Volatile Memory have reached a 4000 cycle limit, replace the drive, and you will now have another 10,000 cycles as a limit". As silly as it sounds, replacing the drive does work, but I'm thinking there may be a way to replace the memory and save this other drive. It's alot cheaper than replcing the drive at $3000! Does anyone have any ideas as to what form this memory appears as on the board? Thanks in advance, Rick.    |
|
| | |
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | Search this Thread |
| Display Modes | |
| |
Similar Threads | ||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Sanyo Denki Drive Problem | cncdiag | Servo Motors and Drives | 0 | 06-03-2008 12:12 PM |
| Sanyo Denki BL Super | corydoras | Servo Motors and Drives | 3 | 01-31-2008 06:41 PM |
| G20 and Sanyo Denki Super-U | happytriger2000 | Gecko Drives | 1 | 05-20-2007 08:24 AM |
| Sanyo Denki Help | Gary D | Stepper Motors and Drives | 0 | 04-06-2007 09:17 AM |
| Step-Syn from Sanyo Denki | tecno | General Electronics Discussion | 4 | 11-09-2003 07:06 PM |
| | |
Linear Mode
