PLC

[frankg521]

Hello All i have a plc from omron sysmac cpm2a and i wan to experiment with it can anyone help me get started

[Cliff567]

I haven't done anything with Omron PLC's, but I would start with the manual first. I did a search and think this is the one you need, I hope the link works.

http://www.omron247.com:8085/marcom/pdfcatal.nsf/PDFLookupByUniqueID/24A14F54422A782B86256A4100519176/$File/W353E106.pdf



Do you have access to the PLC programming software? If not you might want to check the price, some PLC software can be very pricey.

[frankg521]

thanks for the help Clif567 what software woud u recomend ??

[Cliff567]

Originally Posted by frankg521 thanks for the help Clif567 what software woud u recomend ??

You'll have to get the Omron PLC programming software that works with your PLC. I haven't purchased any Omron software, but some software can cost hundreds or even thousands of dollars. I'd check first if you're only using it for learning.