Anilam 3300 mk or Mach III

[MrWild]

Yes, don't use pirated software. Anilam 1100 isn't the exact same as 3300, or Crusader, or Crusader M. Dolphin CAD/CAM can be gotten for hobby prices and it has all the Post Processors you could ever hope to need.

[Toolbit]

I have an anilam 1100 control when I get a message like that, it is usually the code that is being converted has line numbers before the line. It wants to do it's own numbering. For example: "1 g0 x1,y1 z-.250" when that is converted you will get: "1 1 line x1,y1,z-.250" you now have unknown code because it has two line numbers "1 1" anilam 1100 doesn't want line numbers it wants to make it's own when the code comes to the control. each line needs to start with a line,rapid,arc cw, or arc ccw of course they are all caps then the control will add the line number and run the code with its own numbering.

I hope some of that makes sense to you as it's hard for me to explain it.

[Larry Patterson]

I need Anilam 3300mk CPU Have suggestions or ideas?
Larry cedarvalleyairport@hotmail.com

[Custom Billet]

EBay. It is just a MMX 233 processor. You don't need one for an Anilam.

[Custom Billet]

Are you sure it just needs a processor, not a MB?