Need Help!- mastercam post proccesors

[KEN_QUICK]

i am very new to the world of mastercam i am having problems with posting a program in the order in which i am used to writing g-code. i am using a standard post mpfan.pst which is a generic post for fanuc controllers. when i post a program i am getting alot of unwanted code. does anybody have a post for mastercam that will string the code in this manner
%
O0001
(* Machine Tool : 4 Axis Machining Center)
(* Part Name : 039951 C-1 MILL OP 1)
G20 G0 G40 G49 G80 G90
M5
G0 G28 G91 Z
G90
T26 M06 (1/2" HSS SPOT DRILL)
M01
G0 G90 G54 X-2.5625 Y-0.69 S763 M3
G43 Z3.0 H26 M8
G98 G82 X-2.5625 Y-0.69 Z-0.175 P1.0 R0.1 F3.82
X-1.5625
X-0.5625
G80
M9
M5
G49
G0 G28 G91 Z
G90
T08 M06 (5/16 DRILL HSS)
M01
G0 G90 G54 X-2.5625 Y-0.69 S1221 M3
G43 Z3.0 H8 M8
G98 G83 X-2.5625 Y-0.69 Z-0.9189 Q0.12 R0.1 F6.11
X-1.5625
X-0.5625
G80
M9
M5
G49
G0 G28 G91 Z
G90
T04 M06 (3/8-16 UNC TAP)
M01
G0 G90 G54 X-0.5625 Y-0.69 S75 M3
G43 Z3.0 H4 M8
G98 G84 X-0.5625 Y-0.69 Z-1.625 J1 R0.1 F4.69
X-1.5625 J1
X-2.5625 J1
G80
M9
M5
G49
G0 G28 G91 Z
G90
T18 M06 (5/16 CARBIDE IN MILL 4 FL)
M01
G0 G90 G54 X-30.3725 Y-0.7445 S3664 M3
G43 Z3.0 H18 M8
Z0.1
G1 Z-0.8 F50.0
Y-0.7135 F18.32
G3 X-30.3725 Y-0.7865 I0.0 J-0.0365 F14.0
G1 X-25.8125 F18.32
G3 X-25.8125 Y-0.7135 I0.0 J0.0365 F14.0
G1 X-30.3725 F18.32
G3 X-30.3725 Y-0.7865 I0.0 J-0.0365 F14.0
G1 X-25.8125 F18.32
G3 X-25.8125 Y-0.7135 I0.0 J0.0365 F14.0
G1 X-30.3725 F18.32
Y-0.7445
G0 Z3.0
M9
M5
G49
G0 G28 G91 Z
G90
T05 M06 (1/4" CARB ENGRAVING)
M01
G0 G90 G54 X-34.3796 Y-1.7563 S5000 M3
G43 Z3.0 H5 M8
Z0.1
G1 Z-0.075 F50.0
X-34.5917 Y-1.5442 F60.0
X-34.6067 Y-1.5292
G2 X-34.625 Y-1.485 I0.0442 J0.0442
G1 Y-0.015
G2 X-34.6067 Y0.0292 I0.0625 J0.0
G1 X-34.5917 Y0.0442
X-34.3796 Y0.2563
G0 Z3.0
X-0.2454
Z0.1
G1 Z-0.075 F50.0
X-0.0333 Y0.0442 F60.0
X-0.0183 Y0.0292
G2 X0.0 Y-0.015 I-0.0442 J-0.0442
G1 Y-1.485
G2 X-0.0183 Y-1.5292 I-0.0625 J0.0
G1 X-0.0333 Y-1.5442
X-0.2454 Y-1.7563
G0 Z3.0
X-30.3725 Y-0.7475
Z0.1
G1 Z-0.075 F50.0
G3 X-30.3725 Y-0.6225 I0.0 J0.0625 F60.0
X-30.3725 Y-0.8775 I0.0 J-0.1275 F45.0
G1 X-25.8125 F60.0
G3 X-25.8125 Y-0.6225 I0.0 J0.1275 F45.0
G1 X-30.3725 F60.0
G3 X-30.3725 Y-0.7475 I0.0 J-0.0625
G0 Z3.0
M9
M5
G49
G28 G91 Z
G28 G91 Y
G90
M30
%
if anyone can help i would appreciate it
thanks in advance ken

[WingNutz]

Did you get help on this yet?

[hawkburger]

So that means you want USER COMMENTS included ? START LINE missing something ? Not really a specific problem that I can help you out with, but a little communication about which line or codes etc.? Like, "I want M01 after each tool change". Or coolant for my machine should be M51 not M08. Blah Blah Blah......

N1000
N1005
N1010 ?