Networking an Anilam 1400M

[iiweeldman]

Our shop recently purchased 2 Fryer MC-10's with the Anilam 6000 control which has a built in network port.

We have an older Topwell machine that has an Anilam 1400M control on it. I have replaced some of the PC parts in this control when they have failed (hardrives,powersupplies). My question is, because this control is PC based, and there is spare ISA slots on the mainboard, can I install an ISA RJ45 network card and DOS software to make the control networked like the 6000's?


Thanks

Scott

[HelicopterJohn]

Hi Scott,

Here is the contact information on the person that can answer your question.

He works for the Anilam people and is very knowledgable.

Gerald W. Bouvier, Jr.
PH# 716-661-1883
Fax# 716-661-1884
E-mail jbouvier@anilam.com
Networking Specialist



John

[omnicognisant]

Originally Posted by iiweeldman Our shop recently purchased 2 Fryer MC-10's with the Anilam 6000 control which has a built in network port. We have an older Topwell machine that has an Anilam 1400M control on it. I have replaced some of the PC parts in this control when they have failed (hardrives,powersupplies). My question is, because this control is PC based, and there is spare ISA slots on the mainboard, can I install an ISA RJ45 network card and DOS software to make the control networked like the 6000's? Thanks Scott

No Sorry Scott wont work.