Help with Allen Bradley 9/Series ODS software

[GeckerMotor]

We need to come up with the original Allen Bradley 9/Series ODS disks. There is two discs. Can anyone help with this?

Thanks,
Sheldon

[the professor]

Send your e-mail address so I can send a zipped copy to you, also which 9 series are you running? I have an LSN-10 Okuma lathe with a 9-240 control on it. I need a copy of the PAL ladder logic for this machine, battery went dead and the PAL evaporated.
Larry Reiss Omaha NE 402 218 3288 reiss_machinist@yahoo.com

[GeckerMotor]

info@geckermotorsports.com
Call me at the shop at 863-858-3338. I think I have what you need.

Gecker

[Khalid Babar]

I need to come up with original Allen Bradley 9/240 ODS. I am to repair Lucas Horizontal Boring retrofitted. Can anyone help with this?
The first display of the monitor was like this;

xyzw SERVO AMP FE LIMITS

ALLEN-BRADLEY 9/240 CNC-COPYRIGHT (06/03/92)

REVISION RL 3.03

I/O FIRMWARE REVISION NO AO

ANALOG SERVO FIRMWARE REVISION NO. 0.07

ANALOG SERVO FIRMWARE REVISION NO. 0.02

Please send the price for the software at the following address:
khalidbabar91@yahoo.com

[ericandmollie]

I am also in need of the original ODS disk for Allen Bradley controller. Is the Professor still here, or can someone else help?