chinese cnc lathe

[PRIOR666]

Hello I need to move a cnc lathe but i dont have any manuals for it i wonder if someone have manuals for a chinese cnc lathe model ck6140 or where i can found information for this lathe? thank you for any advice.

[soky]

sorry my poor English (don´t speak English). I have enough information on lathe CAK6140 (made in China - in SMTCL manufacture). Have you CNC control Siemens or Fanuc?

sokolvaclav@seznam.cz

[ranjit singh]

Sir,
We have purchased 1 used Ernault Samoua milling Machine model ZHV-1.
travels of the machine x,y,z are 710*270*400. Machine has been retrofitted
with Anilam Microprocessor model CRUSADER-2.problem with the machine is
that when machine is switched on, the display on the monitor is showing
ERROR-18 and it is not enabling the drives in a loop mode or running mode
You are requested to give us the solution or send us operating cum
instruction manual(for crusader-2).,if possible electrical circuit diagram
for the above model.
error code list and how to rectify the errors i.e. controller is
displaying error-12(and your error code shows software limit reached what
is the meaning of it and how to solve it pls tell us).
Is there any troubleshooting and diagnostic manual +electrical circuit
diagrams for crusader-2 .what will the charges for the same.
Thanking You in advance.

Yours sincerely
For Noble Industries
Ranjit Singh
(PROPRIETOR)