Dynapath 10 vs. 20 control on TREE 310

[ken fedirko]

New to CNC, have two tree journeyman 310's, One has Dynapath Delta 10, the other Dynapath 20. What are advantages/differences to each.
I have no manuals , I hope "3S" carries them.

[jagardner4]

The Delta 20 would have the Buffered Input feature (also called drip feed), the ability to execute a part program from the serial port rather than from the part program storage area. The processor may also be faster, but that doesn't affect how well the control will keep the machine on path, since the servo update rates would be the same. There might be other minor differences, depending on what options were sold with each control.

Manuals are available from DynaPath Systems for $210. The same manual will cover both the Delta 10 and Delta 20. Customer Information Manuals cover control operations and programming, while Installation Manuals cover connections and parameters.

Hope this helps!

John Gardner
Software Engineer
DynaPath Systems

[fmc575]

plz i jus bought a milling machine with a dynapath control delta 20 .can any body to help me step by step to start programing on it i read the manual but ineed to know from expert person
thanks