Heidenhain 155 >> LBL CALL - CNCzone.com-The Largest Machinist Community on the net!

praest · #1 08-31-2007, 05:26 AM

I have a problem with my CNC-mill.
The power has been turn off, for so long, that the battery was flat.
I have typed in the parameters, but now I can't use the LBL CALL.
I suspect that I don't have the correct parameters, the machine requred more than I had on my list.

RMARCH · #2 08-31-2007, 02:10 PM

Originally Posted by praest

I have a problem with my CNC-mill.
The power has been turn off, for so long, that the battery was flat.
I have typed in the parameters, but now I can't use the LBL CALL.
I suspect that I don't have the correct parameters, the machine requred more than I had on my list.

I have some parameter lists for different machine with the HH155 control.
What type of machine do you have ? I will also need and email address to send them too.

gridley51 · #3 08-31-2007, 04:39 PM

You can download the Heidenhain 155 manuals from here.One of them will give you an explanation of the parameters.

http://filebase.heidenhain.de/doku/o...2C/N12D2C.html

Mark.

praest · #4 09-03-2007, 02:17 AM

If any one has another idea, why I can't use lbl call please don't hold back

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
What do you call it??	Gncc50	General CAM Discussion	2	06-29-2007 02:49 PM
What do you call them and where can you find them?	Art Ransom	Linear and Rotary Motion	4	09-19-2006 07:16 AM
What would you call this?	MrRage	General Metal Working Machines	7	09-16-2005 04:48 AM
Do not call list!	CNCadmin	CNCzone Club House	10	12-12-2004 03:58 PM

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)