| |
| Home Page | Mark Forums Read | Today's Posts | My Replies | Classifieds | Reviews | Photo Gallery | Web Links | Share Files | Advertise With Us | Ad List |
| |||||||
| General CNC (Mill and Lathe) Control Software (NC) General Discussion of CNC (Mill and Lathe) control software here! |
| | |
| This forum is sponsored by: |
 |
| | LinkBack | Thread Tools | Search this Thread | Display Modes |
|
#1
 
08-08-2007, 10:44 AM
| |||
| |||
Hi, Today morning when I switched on my Hurco BMC30 and started spindle it was running very slowely (20to 30 rpm),but my monitor was showing 700rmp.when I checked the rpm on fanuc spindle drive in panel it was showing 30rpm.I thought it will be ok if I run programme but still the screen was showing 1600rpm and spildle drive was showing actual rpm i.e.55. Pl help in solving this problem Thanks, Javed  |
|
#2
08-08-2007, 11:10 AM
| ||||
| ||||
| Is the programmed S value co-incide with the value on the screen? If so, that is strange as the screen value is usually taken from the spindle encoder which is generally located on the final spindle shaft (actual sp speed). I thought at first it might be a wrong gear problem, but the sysmptoms would probabally be opposite. Is it direct drive or is their gearing? Al.
__________________ CNC, Mechatronics Integration and Machine Design. “Logic will get you from A to B. Imagination will take you everywhere.” Albert E. |
|
| | |
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | Search this Thread |
| Display Modes | |
| |
Similar Threads | ||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Fanuc/Hurco Spindle Drive Problem | gregm1976 | Fanuc | 11 | 08-10-2011 08:00 AM |
| Hurco Security Problem | racer6645 | Machine Problems, Solutions , Wireless DNC, serial port | 1 | 12-17-2006 09:56 PM |
| HURCO ATC problem | jawwad | Machine Problems, Solutions , Wireless DNC, serial port | 0 | 11-09-2006 01:26 PM |
| Hurco BMC 20 startup problem | tirebiter | Machine Problems, Solutions , Wireless DNC, serial port | 3 | 11-08-2006 04:50 PM |
| Spindle, Hurco | ozzie34231 | General Metal Working Machines | 4 | 03-17-2006 07:20 PM |
| | |
Linear Mode
