| |
| Home Page | Mark Forums Read | Today's Posts | My Replies | Classifieds | Reviews | Photo Gallery | Web Links | Share Files | Advertise With Us | Ad List |
| |||||||
| General CNC (Mill and Lathe) Control Software (NC) General Discussion of CNC (Mill and Lathe) control software here! |
| | |
| This forum is sponsored by: |
 |
| | LinkBack | Thread Tools | Search this Thread | Display Modes |
|
#1
 
01-24-2007, 08:39 PM
| |||
| |||
One of the machinists I work with just bought a Hiraoka Kogyo Co. LTD Mill. It powers up and you can input lines of code. You can not input 2 axes of movement at the same time (no circles not even a linear X-Y move). There is no manual with the machine. Here are the things I know: Model #: 2MF-SCV Machine Built in 1992 On the control it says Hiraoka Scalematic When you power it up it says Hiraoka Pulscale The board inside the control is a CK38C Main board # is CK0008 I would really appreciate any information that anybody can give me on this. I did some online searching and come up with practically nothing. Thanks for the help. Nick    |
|
| | |
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | Search this Thread |
| Display Modes | |
| |
Similar Threads | ||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Torch Height Control / Capacitive Height Control | ahlbebuck | Open Source Controller Boards | 0 | 11-27-2006 02:32 PM |
| mf-m6 control | Dave Chip Split | Machine Problems, Solutions , Wireless DNC, serial port | 6 | 05-16-2006 12:10 PM |
| BobCADCAM Layer Control / Snap Control | jonbanquer | BobCad-Cam | 0 | 01-21-2006 04:10 PM |
| Change - from linear path control to CNC path control | fidibus42 | General Electronics Discussion | 1 | 12-04-2005 11:43 AM |
| how to control them :( | stormelf | Stepper Motors and Drives | 7 | 11-27-2005 05:04 PM |
| | |
Linear Mode
