| |
| Home Page | Mark Forums Read | Today's Posts | My Replies | Classifieds | Reviews | Photo Gallery | Web Links | Share Files | Advertise With Us | Ad List |
| |||||||
| General CNC (Mill and Lathe) Control Software (NC) General Discussion of CNC (Mill and Lathe) control software here! |
| | |
| This forum is sponsored by: |
 |
| | LinkBack | Thread Tools | Search this Thread | Display Modes |
|
#1
 
12-07-2006, 02:43 AM
| |||
| |||
 Acromatic 900 mc we have a cincinnati milacron machine center with acromatic 900 mc control, please kindly guide us in the following: -there are some random characters in CRT display it seems that the program system is not ready on memory. please let us know how we can load the program system on memory? (there is program system on three punch tapes and the key labels on cpu card are broken) it's impossible to see and recognize them.    |
|
#2
12-23-2006, 05:43 PM
| |||
| |||
| cinci 900 The 900 control has a battery backup circuit. You have lost the battery and the control software. The software must be reloaded. The 3 tapes that you have are the software tapes. The full reel is #1, the half reel is #2 and the short reel is #3. You should have a T.A.G. manual to instruct you on how to load the tapes. |
|
#3
12-23-2006, 05:44 PM
| |||
| |||
| The 900 control has a battery backup circuit. You have lost the battery and the control software. The software must be reloaded. The 3 tapes that you have are the software tapes. The full reel is #1, the half reel is #2 and the short reel is #3. You should have a T.A.G. manual to instruct you on how to load the tapes. |
|
| | |
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | Search this Thread |
| Display Modes | |
| |
| | |
Linear Mode
