Fanuc / Toyoda FA630

[ajl6549]

We have a 1995 Toyoda FA630 with a Fanuc 15m control. The Fanuc manual says it should be able to use G95 (feed/rev.). The toyoda manual says "G94 = feed inchs per. minute - G95 = feed" and thats it. When I try to feed with G95 it just sits there w/cycle start light lit and no motion. Any insight in this area would be apprieciated.


A.J.L.


P.S. is there any way to know what options this machine has via. the control or otherwise?

[mrainey]

We had to pay extra for the G95 option on Toyoda and Okuma & Howa horizontals (16M, 2001-2002).

The Okuma & Howa guy thought my demand for G95 was ridiculous ("everybody uses inches per minute"). What a crock.

[ajl6549]

a crock is right G94 should be the option