NC Post Processor

[dannyboysd89]

Does anyone know what post processor was used to generate this code?
Thanks,

Dan B

%
:0001
N10G91G28X0Y0Z0
N20G40G17G80G49
N30G0G90Z90.
N40T1M6
N50G54G90
N60( Toolpath Name: MainRough)
N70( Output
N80( UNITS: MILLIMETRES)
N90( TOOL COORDINATES: TIP)
N100( COOLANT: ON)
N110( TOOL NO: 1)
N120( Block
N130( MIN X: -282)
N140( MIN Y: -118)
N150( MIN Z: -4.81363e-007)
N160( MAX X: 282)
N170( MAX Y: 118)
N180( MAX Z: 50.0001)
N190( COORDINATE SYSTEM: WORKPLANE)
N200( Datum - Tool Tip
N210( X: 0.000)
N220( Y: 0.000)
N230( Z: 90.000)
N240( Tool: TIPRADIUSED)
N250( Required tool length: 5.000)
N260( Tool ID: 50mm MMC AJX Face Mill)
N270( Number of Flutes: 1)
N280( DIAMETER: 50)
N290( TIP RADIUS: 3)
N300( Safety
N310( Tool Cutting Moves: Safe No Gouges)
N320( Tool Leads: Safe No Gouges)
N330( Tool Links: Safe No Gouges)
N340( Holder Cutting Moves: Collisions Not Checked)
N350( Holder Leads: Collisions Not Checked)
N360( Holder Links: Collisions Not Checked)
N370( Toolpath: OFFSET Roughing)
N380( STEPOVER: 48)
N390( TOLERANCE: 0.2)
N400( Toolpath Stats
N410( LENGTH: 53402.1)
N420( TIME: 1/17/52)
N430( LIFTS: 69)
N440X164.641Y-49.845S1500M3
N450G43Z80.H1M8
N460G1X171.753Y-51.201Z79.621F500
.........etc, etc, etc................
N3770G0Z90.
N3780M9
N3790G91G28Z0
N3800G49H0
N3810G28X0Y0
N3820M30