| |
| Home Page | Mark Forums Read | Today's Posts | My Replies | Classifieds | Reviews | Photo Gallery | Web Links | Share Files | Advertise With Us | Ad List |
| |||||||
| General CNC (Mill and Lathe) Control Software (NC) General Discussion of CNC (Mill and Lathe) control software here! |
| | |
| This forum is sponsored by: |
 |
| | LinkBack | Thread Tools | Search this Thread | Display Modes |
|
#2
11-19-2005, 09:17 PM
| ||||
| ||||
| You can use DOS programs like Telix and Qmodem, they are still free under shareware. Under windows Cadem has a free one for single machine. Do not use Hyperterminal, the Win 3.1 Terminal was very good if you can get a copy, it runs under later windows. Al.
__________________ CNC, Mechatronics Integration and Machine Design. “Logic will get you from A to B. Imagination will take you everywhere.” Albert E.  |
|
#3
11-20-2005, 08:44 AM
| |||
| |||
| hey chip swepper, We use an old program called tele-mate. I have searched the web to find it but to no avail. I have used it on every upgrade lap-top the company has given me and the latest laptop is a toshiba 2535cds running windows 98se. No problems at all. I upload and download to a : nasa, with fanuc controller and an old Mori-seiki. If you can find tele-mate or a good copy this should be all you need. |
|
#4
11-20-2005, 09:03 AM
| ||||
| ||||
| Chuy, take a look at the following site.. http://www.cadem.com/ncnet/ncnet.htm.. I have used the NC Lite free version on Fanuc, Okuma, DynaPath as well as other CNC control's. Good Luck, JR
__________________ JR Walcott Georgia Machine Tool Resources, LLC |
|
| | |
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | Search this Thread |
| Display Modes | |
| |
| | |
Linear Mode
