Bavelloni Tech

[Yarvin]

Hi everyone,

I just wanted to let everyone out there know that I am an ex-Bavelloni Technician and I still know quite a bit for the machines and software, as well as being Certified by Bavelloni S.P.A. in Italy as a technician(I have the certificate if anyone wants proof). If any of you out there have any questions about the Bavelloni CNC systems (I have installed, trained, torn apart, and rebuilt every CNC that Bavelloni has out there) please drop me a line and ask your questions and I will do my best to help you out

Zoltan

[texglasspioneer]

I realized you posted this a while back. I was wondering if you could help me with technical issues ive been having with our gemiv10 glass polishing machine.Let me know if you can thanks.

[cncforlife]

Originally Posted by Yarvin Hi everyone, I just wanted to let everyone out there know that I am an ex-Bavelloni Technician and I still know quite a bit for the machines and software, as well as being Certified by Bavelloni S.P.A. in Italy as a technician(I have the certificate if anyone wants proof). If any of you out there have any questions about the Bavelloni CNC systems (I have installed, trained, torn apart, and rebuilt every CNC that Bavelloni has out there) please drop me a line and ask your questions and I will do my best to help you out Zoltan

Please help. I'm new in the forum,and if you can help me I'd appreciate.
I have a problem with my Bav Alp a 102s. It gives me warning at the operator messages page like "SPINDLE MOTOR THERMAL PROTECTION".
Any idea what the problem could be? I know it could be spindle cable problem but before I start desmandling I could listen to someone else who knows more than i do.Any idea or comment-suggestion is welcome.
Zorba

[Coonen]

Originally Posted by cncforlife Please help. I'm new in the forum,and if you can help me I'd appreciate. I have a problem with my Bav Alp a 102s. It gives me warning at the operator messages page like "SPINDLE MOTOR THERMAL PROTECTION". Any idea what the problem could be? I know it could be spindle cable problem but before I start desmandling I could listen to someone else who knows more than i do.Any idea or comment-suggestion is welcome. Zorba

Hi

With typ off driver you have Intramat ore Yaskawa.
Check the LED on the driver and the cable
often ther is a problem with the Cable.

RC

[SASHA-V]

HI
I AM LOOKING FOR SOME HELP ON MY EGAR 450. IF YOU ARE INTERESTED PLEASE LET ME KNOW.
SASHA@HAMILTONGRANITE.COM

THANKS SASHA

[Coonen]

Originally Posted by SASHA-V HI I AM LOOKING FOR SOME HELP ON MY EGAR 450. IF YOU ARE INTERESTED PLEASE LET ME KNOW. SASHA@HAMILTONGRANITE.COM THANKS SASHA

Hi Sasha

Tel me wits problem you have .

Regards Roy

[VT-1301]

Originally Posted by Yarvin Hi everyone, I just wanted to let everyone out there know that I am an ex-Bavelloni Technician and I still know quite a bit for the machines and software, as well as being Certified by Bavelloni S.P.A. in Italy as a technician(I have the certificate if anyone wants proof). If any of you out there have any questions about the Bavelloni CNC systems (I have installed, trained, torn apart, and rebuilt every CNC that Bavelloni has out there) please drop me a line and ask your questions and I will do my best to help you out Zoltan

Hello

I have a problem setup and calibration due to change engine POSMO. I lost my login technician to access the setup page. In addition, the parameters of the X axis jumped and I can not make the reset of the VT-1301

Thank you for your help

[jamieosborn]

Anyone out there with Bavelloni cutting tables, especially with the NUM1040 controller, experience?

I have an issue I'm trying to work out.