V carving and corner sharpening

[bowber]

Hi All

I've finished my router and have been playing with it but it looks like I need some more software to create v cut text with shapened corners like Vectrics V carve pro.

As I already have Sheetcam and Meshcam plus I've spent quite a bit on the router I'm looking for something very cheap or free to do this.

Catch 22, need the software to make the right product to sell, but need the money for the software

Or does anyone have an idea how to do this with the software I already have, I think the jobs would take too long using meshcam, I could maybe code the moves by hand but it would be very long winded and I'm not sure the result would be very good.

Thanks for any ideas
Steve

[ger21]

http://cgi.ebay.com/VCarve-Text-Data...3%3A1|294%3A50

[bowber]

Very interesting, must have taken him a while to get the paths right for the depth.
Could maybe run a spreadsheet to output the paths if you knew how, I don't!

Unfortunatly I'm also wanting to be able to Vcarve areas as well as text. Still I may buy this to use for the moment.

Steve