looking for post processor for nx3 nx4 or nx5

[boofa]

I don't know if anyone could help me but I am looking for a post for Unigraphics NX3 NX4 or NX5. It is for a Nakamura Tome Lathe model SC200LMY with a Fanuc 18i-TB control. It has live tooling and dual spindles. Any help would be appreciated .

Thanks Bruno

[Brewmeister]

There are several "Mill-Turn" posts for the 18i available in the customer post library

http://ftp.ugs.com/unigraphics/pb_posts/post_index.htm

Just use your WebKey Id/Pw to log in. (You can also register using your Site ID if you don't have a WebKey yet.)

Be Well

[boofa]

thanks