LinkBack URL
About LinkBacks
Mastercam is by far the most popular. Both educational and industrial. They have been for quite a while. This is from an independant study, not something that Mastercam dreamed up themselvse..
.jpg)
| | |
I need some marketing information regarding MILL/TURN/WIRE CAD/CAM systems.
Would anyone have information explaining the percentage US CAD/CAM market share held by CAD/CAM software vendors.
I am particularly interested in Delcam, MasterCAM, Pathtrace, Gibbs & ESPRIT. I have trawled the NET and found a few sites who are willing to sell the information but I have no money for this and no idea how reliable this information would be.
Any help would be greatly appreciated.
Andy NC
Mastercam is by far the most popular. Both educational and industrial. They have been for quite a while. This is from an independant study, not something that Mastercam dreamed up themselvse..
Matt
San Diego, Ca
___ o o o_
[l_,[_____],
l---L - □lllllll□-
( )_) ( )_)--)_)
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
Andy,
Here is a link:
http://www.cimdata.com/press/PR04-0513.htm
Just remember that all figures are estimates as few companies provide hard and fast data on both sales and financial data.
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
Posting Permissions
| | |
