| |
| Home Page | Mark Forums Read | Today's Posts | My Replies | Classifieds | Reviews | Photo Gallery | Web Links | Share Files | Advertise With Us | Ad List |
| |||||||
| General CAM Discussion Discuss CAD/CAM software and Design software methods here! |
| | |
| This forum is sponsored by: |
 |
| | LinkBack | Thread Tools | Search this Thread | Display Modes |
|
#1
 
05-01-2003, 05:21 PM
| |||
| |||
 Help with a G68 A friend of mine is programming a Daewoo ACE-B130 with a Fanuc 16M control and is having problems with a G68. What is the proper format for a G68? For example he is trying to program 10 holes around a 20" diameter bolt circle. Is this command also possible to vary the degrees between each? Any help would be appreciated. Bob       |
|
| | |
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | Search this Thread |
| Display Modes | |
| |
| | |
Linear Mode
