I moved the thread to general cad/cam since you may get a better response in here![]()
I was playing around today and started to draw up a machine in Rhino (going to end up being 5 axis). I was curious if anyone has had the chance to model something similiar to a dremel tool (similar in size). If so, would ya wanna share it?
I wasn't really sure if this was the right place for this so excuse me for intruding if it is not.
I don't plan on actually building this machine, I was just bored. Now I gotta finish it!![]()
I moved the thread to general cad/cam since you may get a better response in here![]()
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
This is the best source on the web for 3D models in many formats. http://www.3dcontentcentral.com/3DCo...l/cc_frame.asp I couldn’t find what you’re looking for but you will find many others there that will help you with 3D modeling. If you model a Dremel tool put it in the user library so all can use it. If you have good dimensions for one I’ll model it.
Gary![]()
I uploaded a simple model of a Dremel that I made tool to the downloads section. Hope it helps
jgro
http://jgroshoppages.blogspot.com/
I uploaded it, so it's their for you.Originally posted by jgro
I uploaded a simple model of a Dremel that I made tool to the downloads section. Hope it helps
jgro
Thank You,
Paul G
Site Owner-Webmaster-
Administrator
www.rfqwork.com
www.cnczone.com
www.welderzone.com