LinkBack URL
About LinkBacks
Wouldn't we have to know what software package you are using?
| | |
Just wondering if anyone has a fadal lathe post. posts are tough to come by on the net without costing a bundle.
Wouldn't we have to know what software package you are using?
First you get good, then you get fast. Then grouchiness sets in.
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
Well you will not find a post for a fadal lathe as fadal does not make lathes.
Sorry.
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
Cadcam
Owner, contract Programming and Consultant , Mastercam Instructor and on line trainer at www.eapprentice.net
Some tips: http://www.youtube.com/PrecisionProgramming
If they did what would the post look like?
Maybe we can just guess at a Fadal Lathe post.
You sure you don't mean Fanuc?
And what software as mentioned will be critical. This is one reason I love Edgecam, the post editor works like a champ for making minor tweaks.
sorry people, another person wrote me looking for it, i just forwarded the question. at my place we don't have any fadals. mostly mazak, haas, dmg, and kitamura. i believe the software he is using is mcs anvil express. Maybe he meant fadal mills because i know they have a few. thanks for the responses though.
Posting Permissions
| | |
