| |
| Home Page | Mark Forums Read | Today's Posts | My Replies | Classifieds | Reviews | Photo Gallery | Web Links | Share Files | Advertise With Us | Ad List |
| |||||||
| General CAM Discussion Discuss CAD/CAM software and Design software methods here! |
| | |
| This forum is sponsored by: |
 |
| | LinkBack | Thread Tools | Search this Thread | Display Modes |
|
#1
 
04-26-2007, 05:09 AM
| |||
| |||
Hi Guys, I hope that someone can help me, or am I looking for rocking horse poo? I am after a piece of software (Preferable free) that will read an NC program and display graphically what the program does. I have dedicated software on all my machines, but for training purposes it would be far easier to use a PC, and not tie up machines in the shop. Now for the really trick bit. I am currently using machines with Heidenhain 155, Heidenhain 370 and fanuc controls, it would be really nice if the software in question would read all three types. Hopefully Mick  |
|
#2
04-26-2007, 08:25 AM
| ||||
| ||||
|
__________________ CNC, Mechatronics Integration and Machine Design. “Logic will get you from A to B. Imagination will take you everywhere.” Albert E. |
|
#3
04-26-2007, 01:02 PM
| ||||
| ||||
__________________ Robbie (Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management) |
|
#4
04-27-2007, 04:29 AM
| |||
| |||
| Hi Guys, Thanks for the rapid response, that does indeed look like a good piece of software for the fanuc controller.If it trials Ok it will become part of the training process. How about for the heidenhain? That is rocking horse poo, aint it? Cheers Mick |
|
| | |
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | Search this Thread |
| Display Modes | |
| |
Similar Threads | ||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| tape emulator | bbrreid | Machine Problems, Solutions , Wireless DNC, serial port | 4 | 04-12-2007 03:03 PM |
| I need to build a paper tape emulator | paramax55 | General Electronics Discussion | 14 | 04-11-2007 04:40 PM |
| Dnc and windows emulator | camtd | LinuxCNC (formerly EMC2) | 0 | 02-24-2007 06:08 PM |
| Looking for emulator | deadmangryphon | Fanuc | 2 | 02-16-2006 04:17 AM |
| TU48 Tape emulator (on PDP-11) | Nurglle | General CNC (Mill and Lathe) Control Software (NC) | 2 | 11-16-2005 01:13 PM |
| | |
Linear Mode
