dxf file import problem with Flashcut CNC

[oakcnc]

Using a cad program I make a triangle drawing. Then export as a dxf file. I then import to Flashcut and get only the following gcode

(File created using FlashCut CNC DXF Import)
(Import File: rectangle.dxf)
(Import Date: 1/16/2007)

N10 G00 Z 0.25000

Why don't I get gcode to cut a rectangle?

[flashcut_west]

Hi OakCNC,

I'm not sure if you're trying to cut a triangle or rectangle. If you create a DXF file, with no Z moves, it should be converted into clean G-Code in Flashcut. Feel free to call us at 847-940-9305 and we'll look at the file for you.

Regards
Mike McCall
Flashcut CNC