LinkBack URL
About LinkBacks
Our website http://cadcamtrainer.com/forums/index.php is still under construction. In the coming weeks you will see some changes. Thank-you for stopping by Mike M
We have started a new website for CAD/CAM ( not just bobcad) at http://cadcamtrainer.com/forums/index.php Please stop by an register Thank-you Lakeside
Last edited by lakeside; 09-10-2006 at 03:47 PM.
Our website http://cadcamtrainer.com/forums/index.php is still under construction. In the coming weeks you will see some changes. Thank-you for stopping by Mike M
Last edited by lakeside; 09-10-2006 at 05:55 PM.
You didn't mention to COOL icons we have for posting like the F14 Tomcat.
New members welcome to join, and enjoy a good learning experience.
Toby D.
"Imagination and Memory are but one thing, but for divers considerations have divers names"
Schwarzwald
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
www.refractotech.com
Tim ( tjones ) who is setting up the site has added new forums for both Mastercam and Gibbscam. If anyone has a link or thread for those Software or would like something add to the forum just Pm him. In the coming weeks Tim will be adding more
Last edited by lakeside; 09-10-2006 at 08:19 PM.
I'll be suggesting an Alibre and a TurboCad section as well.
Toby D.
"Imagination and Memory are but one thing, but for divers considerations have divers names"
Schwarzwald
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
www.refractotech.com
Tim has now added new forum for Onecnc Surfcam TurboCad AutoCad and Tim favorite Alibre please stop by and register
http://cadcamtrainer.com/forums/index.php
Last edited by lakeside; 09-10-2006 at 09:54 PM.
Posting Permissions
