| | |
Has anybody had any experience using Design Cad 3D and its counterpart Cam? It looks very inexpensive, I know what this usually means but not in all cases. Let me know.
http://www.imsisoft.com/faminfo.asp?fam=2
Exotic Welder
Originally Posted by dave6
I checked the website you posted and it looks pretty good. Did you checkout the free trials? I really have no knowledge of this software. Until someone posts experience maybe you should try it out and form your own opinion. What type of work will you be doing really decides what software you will need.
Good Luck on your search and remember to plan for a little extra capability for the future because you never know when you may need that extra ability.
Toby D.
"Imagination and Memory are but one thing, but for divers considerations have divers names"
Schwarzwald
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
www.refractotech.com
DesignCAD has always been an excellent CAD package, especially for the price. I started using it over 10 years ago. Contour CAM is apparently a brand new product. First time I've seen it.
Gerry
Mach3 2010 Screenset
http://home.comcast.net/~cncwoodworker/2010.html
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
Im not sure how well it works. But the Contour Cam looks like a pretty interesting package for the price.
Robbie
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
I am also interested in the CAD/CAM abilities of this software
any comments from actual users?
Posting Permissions
| | |
LinkBack URL
About LinkBacks
