LinkBack URL
About LinkBacks
Post the first few lines of your code here, if you don't mind. Which post processor are you using?
| | |
After I create my toolpath in Meshcam, how should I be exporting it into Mach3?
I have tried a variety of extentions, but it keeps saying there is an error on my line 0 of g-code.
Any suggestions or tutorials for someone who is totally new to this stuff?
-CG
Post the first few lines of your code here, if you don't mind. Which post processor are you using?
Gerry
Mach3 2010 Screenset
http://home.comcast.net/~cncwoodworker/2010.html
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
ya i had the same problem try deleteing it
Meshcam has a postprocessor for Mach 2. I've e-mailed Art and he says it works the same for Mach 3. I've had no trouble posting Meshcam to MACH3
Posting Permissions
| | |
