5 Axis

[Tony the Ferret]

Hi All, we are also in the business of 5 axis software, we don't often get asked about 3rd party PostProcessors because the ones you get with your purcase of WorkNC are the only ones you will need, These are taylored to YOUR machine, the EXACT machine dimensions & limits will ensure you don't have an expensive crash. Although we have used austinnc in the past
www.foregonesolutions.co.uk

[sraghavan]

you can look at machines like edel, shw, chiron etc., for softaware definitely i recommend only hypermill for 5 axis. visit their website www.openmind.de

[yohudi]

Part 1 and 2 of a brand new detailed user guide for CNC_Toolkit are out TODAY.. available as a free download from the yahoo group in my sig.. I made the guide..

Rab Gordon, the creator of CNC_Toolkit has contributed suggestions and has approved the distribution. Part 3 covering the deployment and use of multi-axis rotary configurations is currently being developed and tested...

If you have any interest in CNC_Toolkit then it's worth a read, feel free to pick up copy...

ttfn

Danny (aka Yohudi)