| |
| Home Page | Mark Forums Read | Today's Posts | My Replies | Classifieds | Reviews | Photo Gallery | Web Links | Share Files | Advertise With Us | Ad List |
| |||||||
| General CAM Discussion Discuss CAD/CAM software and Design software methods here! |
| | |
| This forum is sponsored by: |
 |
| | LinkBack | Thread Tools | Search this Thread | Display Modes |
|
#1
 
04-06-2006, 01:23 AM
| |||
| |||
Ok i tried drawing a cross section of a part i'm woring on there are many arcs in the z direction but when i convert them with ace or mach 3 they are rotated 90 deg flat instead of horizontal.. anyone seen this?    |
|
#2
04-06-2006, 07:16 AM
| ||||
| ||||
| Ace or Mach3 needs to have everything be on the XY plane. If you have anything in 3D space it won't work correctly.
__________________ Gerry Mach3 2010 Screenset http://home.comcast.net/~cncwoodworker/2010.html (Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management) |
|
| | |
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | Search this Thread |
| Display Modes | |
| |
| | |
Linear Mode
