LinkBack URL
About LinkBacks
Free is about as cheap as it gets.
I copied this from Ger21.
Try using A9CAD from www.a9tech.com and ACE converter from www.dakeng.com to create your g-code.
Both free.
ACE will work with TurboCAD, too. It converts .dxf files.
| | |
does any one know whats the cheapest one out there
Free is about as cheap as it gets.
I copied this from Ger21.
Try using A9CAD from www.a9tech.com and ACE converter from www.dakeng.com to create your g-code.
Both free.
ACE will work with TurboCAD, too. It converts .dxf files.
Do they work together?
They should or you get your money back!
Seriously, I've never tried them, but it should work. If you need more functionality, you might have to spend some money.
www.sheetcam.com works well for 2D and 2-1/2D CAM. I own it.
The cheapest one is the one that doesn't steal your life and hand it back to you in scrapped parts, broken tools and damaged machinery.
First you get good, then you get fast. Then grouchiness sets in.
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
Posting Permissions
| | |
