Engraving program

[gripper]

Hi, hope this is the right place for asking this question but does anybody know of a program for doing engraving and then write for a EZtrak DX to engrave.
Thankyou.

[FranH]

MILLWRITE...excellent program..output to many machine controls. Not sure but it may be lacking in sequential serialization and if that is needed search the web as there is one out there

[fastolds]

I use millwrite 2000. So if you have any questions I will try my best to answer them or if you decide to get it let me know, I get a discount.

[gripper]

Thankyou both, will go and have a look

[jdr]

Just a quick note for anyone looking for Millwrite 2000. Emachinetool.com has Millwrite 2000 on sale at 60% off list. Regular price is $850.00 sale price is $340.00
I received version 4.55 and Fontlink version 2.15.

Great price if you need this software.

[Tony Mac]

Hi Gripper,

Are you running a 2 or 3 axis EZtrak DX?

If it's 3 axis you might also take a look a VCarve Wizard.

There's a Free Trial version that will let you cut some sample pieces on your own machine.

Hope this helps,

Tony Mac