I am new to this website and hope I am starting off this question in the right place.

The company I work for just purchased a Milltronics br80 with the 150 inch travel. I am familiar with cnc programming but not for a mill. I program a cnc punch and have programmed for our routers with bobcad years ago.

I know I am opening a loaded question here and probably with a lot of opinions but would like some input anyways.
I also know without providing alot about the type of work we will be doing on the machine this is a harder question to answer. I can only say we will be doing a lot of everything on it.
And alot of our pieces will more than likely be individule peices not production runs. Each piece will be unique in some sort of way.


Q: which software Bob-cad or Mastercam would be best for this machine. (or possibly others)