Drilling Macro

[Rekd]

Originally posted by mandrew35 Ok, I need to output the longcode for a peck drill cycle correctly, then I'll just sub it for the other 1200 hole locations. Do you need to know what POST I'm using? Let me know...

I'll need a copy your current post, with the .txt file, and an NC file modified to what you want the output to be.. (I don't really need the sub, but I'll need the tool change portion, with/without M3's etc.

'Rekd

[mandrew35]

I'll try and getthis out to you todaym if not then by tomm afternoon.

Thanks.....

[Rekd]

Originally posted by MachineSMM Rekd You have me very interested in your custom programs. I would like to ask you a few questions if you don't mind. Are these a separate program or do they run inside of another program? If they run on their own, how do you create them? I have wanted to create a couple of things for myself but I was not sure how to go about it. Any info you would share with me would be great. Please feel free to contact me via email at christellers@eschelon.com Thanks

I'll try and get an email out to you today..

'Rekd