LinkBack URL
About LinkBacksI am looking for a free or inexpensive V-carving program to create a sign for our shop. The software we have is basically for cutting cabinet components. Basically just want to design and cut a custom sign for our shop and our showroom.
I am looking for a free or inexpensive V-carving program to create a sign for our shop. The software we have is basically for cutting cabinet components. Basically just want to design and cut a custom sign for our shop and our showroom.
V-Carve Pro is the cheapest, and the best. But it's not really cheap. www.vectric.com
AFAIK, there is nothing available for free or any cheaper than this.
Gerry
Mach3 2010 Screenset
http://home.comcast.net/~cncwoodworker/2010.html
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
Posting Permissions
