DB connector cutouts

[mickelsen]

Hi all,

I need to make some cutouts in a backpanel for some standard DB connectors (DB-9, DB-15, and DB-25). Does anyone know where I can get some accurate drawings of the outlines and mounting holes that I can import into my drawing? I can use DXF format, but anything that can be imported into Rhino or MoI will be fine.

Thanks,
Mark

[Iron-Man]

Hi all,

I need to make some cutouts in a backpanel for some standard DB connectors (DB-9, DB-15, and DB-25). Does anyone know where I can get some accurate drawings of the outlines and mounting holes that I can import into my drawing? I can use DXF format, but anything that can be imported into Rhino or MoI will be fine.

Thanks,
Mark

Mickelsen, check the link below for DB-25.dxf connector;

Highly Liquid: MIDI Accessories: DB-25 Panel Plate

Check this link for cutouts database;

Purcell Brackets;Brackets:PCI brackets, i/o brackets, compact PCI front panels, CPCI front panels, compact PCI ejector handles, PMC panels and PMC bezels

Hope this helps,

Iron-Man

[john_100]

Hi Mark ,

is this link any help ?

http://docs-europe.electrocomponents...6b80847bed.pdf

John