| |
| Home Page | Mark Forums Read | Today's Posts | My Replies | Classifieds | Reviews | Photo Gallery | Web Links | Share Files | Advertise With Us | Ad List |
| |||||||
| | |
| This forum is sponsored by: |
 |
| | LinkBack | Thread Tools | Search this Thread | Display Modes |
|
#1
 
01-02-2008, 08:53 PM
| |||
| |||
| More to my machine Hi again, Still no luck with getting my machine working, it has been just about 4 months now.Nobody in Christchurch NZ seems to know how to fix it. I have been to a place that sells cnc routers,they did not know,i have phoned industrial electricians,but they say not my field. If i plug the X and Y axis cables in the Z plug and press the Z jog button,the X and Y work,but if i plug them in their own plugs and press the jog buttons nothing happens.I thank the members of the forum for the previous help Mike    |
|
| | |
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | Search this Thread |
| Display Modes | |
| |
Similar Threads | ||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Deep Groove Taig machine would it be a good starter machine | Fritzie15 | Taig Mills & Lathes | 0 | 09-20-2007 10:37 PM |
| Use Machine Shop vs. Buying Machine | imp22b | General Metalwork Discussion | 15 | 06-06-2007 07:33 AM |
| G Code Variances from machine to machine? | Miguel Gonzalez | G-Code Programing | 16 | 03-28-2007 04:31 AM |
| Mach 2 on old machine = great machine | foamcutter | Machines running Mach Software | 6 | 12-16-2005 01:11 PM |
| Getting work(gcode) from machine a to machine b | strat | DIY-CNC Router Table Machines | 9 | 07-07-2005 03:13 PM |
| | |
Linear Mode
