More to my machine

[toby51]

Hi again,
Still no luck with getting my machine working, it has been just about 4 months now.Nobody in Christchurch NZ seems to know how to fix it.
I have been to a place that sells cnc routers,they did not know,i have phoned industrial electricians,but they say not my field.
If i plug the X and Y axis cables in the Z plug and press the Z jog button,the X and Y work,but if i plug them in their own plugs and press the jog buttons nothing happens.I thank the members of the forum for the previous help
Mike

[toby51]

Thanks Shannon,this young fella got the machine going after about 10 mins looking at it.
The problem was a loose wire in one of the control units.
Thanks Mate
Mike