Dinosaur skeleton, and other models, DXF files.

[eqreservoir]

WUPPI1956

Great job on the T-rex. I just gotta build a machine.

[Kipper]

I hope, you can see the photo.

Awesome matey That would look nice in the front garden

[ynneb]

Thats a fantastic dino Wuppi. I love it.
Thanks so much for posting the picture.

[jack_live]

thanks to all for the archives and will have some different one can place here that I cut in the weekend

[ynneb]

Debtor = Thanks ?
You have been busy Jack. Thanks for posting these pictures.

[jack_live]

Debtor = Thanks ?
You have been busy Jack. Thanks for posting these pictures.

yes! sorry my english is bad, i'am brazilian

[gmfoster]

debtor to all for the archives and will have some different one can place here that I cut in the weekend

Nice Work!

Garry

[Beezer]

jack_live those look fantastic. Nice Job. Would you mind sharing the files for the Eagle on top of the globe and the Tarantula? I would love to try cutting those. Did you use 1/8" or 3/16" material for those?

Carl

[buddym]

Thanks for all of the posts! I am working on an alligator file. When its done I will post.

[jack_live]

jack_live those look fantastic. Nice Job. Would you mind sharing the files for the Eagle on top of the globe and the Tarantula? I would love to try cutting those. Did you use 1/8" or 3/16" material for those?

Carl

hi I used plate of 3mm and bit of 1/16 to cut. you wants the archive in artcam? dxf or g-code?

[Beezer]

hi I used plate of 3mm and bit of 1/16 to cut. you wants the archive in artcam? dxf or g-code?

The dxf would be great, seeing how I don't have ArtCam but do have access to MC so I can generate my own gcode to match my machine plus edit the drawing if I want to change material thickness.

Thanks,
Carl

[Wuppi1956]

http://www.blechwelt.com/teil_des_mo...2%20spinne.dxf

Above is a link to a dxf-file for another tarantula-puzzle.

And the second Link goes to a site, where you can download a lot of other puzzles.

http://www.blechwelt.com/teil_des_monats/archiv.htm

Have fun...

[jack_live]

http://www.blechwelt.com/teil_des_mo...2%20spinne.dxf

Above is a link to a dxf-file for another tarantula-puzzle.

And the second Link goes to a site, where you can download a lot of other puzzles.

http://www.blechwelt.com/teil_des_monats/archiv.htm

Have fun...

Thanks!!!Thanks!Thanks!Thanks!

[jack_live]

The dxf would be great, seeing how I don't have ArtCam but do have access to MC so I can generate my own gcode to match my machine plus edit the drawing if I want to change material thickness.

Thanks,
Carl

it is good?

[DayneInfo]

Keep this up...I am going to need a bigger hard drive and less time at work...LOL

[Beezer]

Thanks for those files Jack. They loaded fine.

Thanks for that site link Wuppi1959. Interesting site. Just wish I could read German so I could understand the other items there. HEHE

[HayTay]

Thanks for those files Jack. They loaded fine.

Thanks for that site link Wuppi1959. Interesting site. Just wish I could read German so I could understand the other items there. HEHE

You don't need to, try Google Translate.

Blechwelt.com Translated from German to English

[DayneInfo]

I went to the site in German and found the Christmas Tree. It will not let you down load, says something about not available. Anyone have a cut out for it?

Dwayne

[txcowdog]

Right click on the Christmas tree and then "save target as". There is another pattern there that you have to download in this manner. For some reason the download button does not work.

[DayneInfo]

I tried that and got an error when trying to open the file. Tried with Corel, SketchUp, VCarve and efiles.

Dwayne