- Need Help!- Lantek software controling Plasma/Punch press
-
Registered
Lantek software controling Plasma/Punch press
Hello
I have just installed a new Plasma/Punch combination machine
To program the machine we use Lantek Expert software.
Im new to both Lantec software and plasma machine
My problem now is as follow.
I often has quite long parts to cut. About 1500mm in X axis
But the parts are only about 150mm in the Y-axis
So the long sides I want to use the quicker punch and the short sides I want to use the plasma since there is often a complex contour.
The Lantek software only want to cut the complete contour of the parts or punch it.
I cant mix plasma and punch on the same contour
Do anyone here use Lantek software and know how to solve this problem?
Similar Threads:
-
-
Registered
- Need Help!- Lantek software controling Plasma/Punch press
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules