THC Sewing/bounce

[Orangejbird]

Torch moves up and down slightly about 3 times a second. Looks like it's trying to sew. Changing tip volts changes the height the bounce happens at. Bounces about 1/32"

Mach3

I'm probably missing a THC setting of some kind?
Any suggestions?

DynaCNC w/4000 series controls, Cutmaster 52.

Similar Threads:

• Home/ Limit switch bounce
• THC bounce/oscillation
• THC bounce
• switch bounce problem
• sewing surfaces

[Mike 1948]

Torch moves up and down slightly about 3 times a second. Looks like it's trying to sew. Changing tip volts changes the height the bounce happens at. Bounces about 1/32"

Mach3

I'm probably missing a THC setting of some kind?
Any suggestions?

DynaCNC w/4000 series controls, Cutmaster 52.

You might want to post on the Mach3 forum:Machsupport Forum - Index

Mike