I am about to disassemble a Omax P2040 pump and before I do I'm hoping someone can provide some pointers.
The manual I have isn't the best but appears to be the original that Omax supplied.
They list a couple tools- a seal extractor # 300868 & cylinder punch # 300690 which are no longer available.
Omax isn't able to provide much help so I'm hoping someone out there can tell me about their experience with the rebuild.

One of my concerns is spending money on rebuild parts only to find the pump won't reach full pressure due something I overlooked or
did not replace. I purchase this machine used and was told it needs a rebuild.
Any experience you can share will be much appreciated.

Tim

Similar Threads: