Need Help! Problem with ISEL. ISELDRV.EXE

Results 1 to 14 of 14

Thread: Problem with ISEL. ISELDRV.EXE

  1. #1
    Registered
    Join Date
    Jan 2018
    Location
    Russian Federation
    Posts
    7
    Downloads
    0
    Uploads
    0

    Default Problem with ISEL. ISELDRV.EXE

    Good day to all.
    I have an old ISEL machine (PC running DOS with UPMV 4/12 card and I / O boards, drive control unit). I do not know its model. Recently, there was an error reading HDD and the machine stopped to be controlled. When you run the ISELDRV.EXE file, the "Program too large to fit in memory" error appears. It was not possible to restore the data completely. After analyzing the contents of the executable file, it appeared that ISELDRV.EXE was damaged. Does anyone have this file?
    I'm ready to install other software, but I'm not sure that it supports this hardware. Can someone had a similar and share experience? Or are there other ways to solve this problem?
    Thank you

    Similar Threads:
    Attached Thumbnails Attached Thumbnails Problem with ISEL. ISELDRV.EXE-dscn3409-jpg   Problem with ISEL. ISELDRV.EXE-dscn3411-jpg   Problem with ISEL. ISELDRV.EXE-dscn3050-jpg  


  2. #2
    Registered
    Join Date
    Jan 2018
    Location
    Russian Federation
    Posts
    7
    Downloads
    0
    Uploads
    0

    Default Re: Problem with ISEL. ISELDRV.EXE

    ISEL controller is CV PV-3



  3. #3
    Member
    Join Date
    Dec 2016
    Location
    United Kingdom
    Posts
    10
    Downloads
    0
    Uploads
    0

    Default Re: Problem with ISEL. ISELDRV.EXE

    I have a copy, I am just trying to install the USB drivers on the win98 machine so I can get a copy. I'll post it when i have it.



  4. #4
    Member
    Join Date
    Mar 2016
    Location
    Poland
    Posts
    322
    Downloads
    0
    Uploads
    0

    Default Re: Problem with ISEL. ISELDRV.EXE

    Did U try to use other software?
    Check galaad software (precisely Key programm). It should enable to connect any computer with Your machine. U can check demos.



  5. #5
    Registered
    Join Date
    Jan 2018
    Location
    Russian Federation
    Posts
    7
    Downloads
    0
    Uploads
    0

    Default Re: Problem with ISEL. ISELDRV.EXE

    Quote Originally Posted by steryd View Post
    Check galaad software (precisely Key programm)
    I told with Galaad support and they said, that "Isel UPMV4/12 is a bit complicated since control is not direct from Galaad to the communication port. It requires the DLL and INI files that are provided with the machine." I have not these files for Windows and cannot find them for this time.
    What about Kay I didn't find my conroller CP PV-3 in demo-version. Did you find it?

    Last edited by habariniv; 01-16-2018 at 04:47 AM.


  6. #6
    Member
    Join Date
    Dec 2016
    Location
    United Kingdom
    Posts
    10
    Downloads
    0
    Uploads
    0

    Default Re: Problem with ISEL. ISELDRV.EXE

    I contacted Key for the same question - to update the machine, I would buy it tomorrow if it worked. They have tried to integrate the UPMV card in the past, but had some compatibility issues. They do not reccomend using it. If you could get it working, you still need to use the ini files etc

    ISEL RemoteWIN manual shows that it should be compatible with the UPMV card. I have asked for confirmation from our local dealer before I buy. I am waiting to hear back.
    RemoteWIN looks far better than RemoteDOS



  7. #7
    Member
    Join Date
    Mar 2016
    Location
    Poland
    Posts
    322
    Downloads
    0
    Uploads
    0

    Default Re: Problem with ISEL. ISELDRV.EXE

    I think i have remote WIN in my job. Not using it. U can try it if U want.



  8. #8
    Registered
    Join Date
    Jan 2018
    Location
    Russian Federation
    Posts
    7
    Downloads
    0
    Uploads
    0

    Default Re: Problem with ISEL. ISELDRV.EXE

    Quote Originally Posted by steryd View Post
    I think i have remote WIN in my job. Not using it. U can try it if U want.
    Thanks, of course I will try. Send it to me, please



  9. #9
    Registered
    Join Date
    Jan 2018
    Location
    Russian Federation
    Posts
    7
    Downloads
    0
    Uploads
    0

    Default Re: Problem with ISEL. ISELDRV.EXE

    Quote Originally Posted by rc-worcs View Post
    I contacted Key for the same question
    Today I take same answer from Kay.

    Quote Originally Posted by rc-worcs View Post
    ISEL RemoteWIN manual shows that it should be compatible with the UPMV
    Isel have ProNC too, which should be compatible with the UPMV (before Win2000). Can this program control drivers?



  10. #10
    Member
    Join Date
    Dec 2016
    Location
    United Kingdom
    Posts
    10
    Downloads
    0
    Uploads
    0

    Default Re: Problem with ISEL. ISELDRV.EXE

    that was painful!

    I have ISELDRV.EXE now. I cant seem to post it here. I shall try and message it .



  11. #11
    Member
    Join Date
    Dec 2016
    Location
    United Kingdom
    Posts
    10
    Downloads
    0
    Uploads
    0

    Default Re: Problem with ISEL. ISELDRV.EXE

    Quote Originally Posted by habariniv View Post
    Today I take same answer from Kay.


    Isel have ProNC too, which should be compatible with the UPMV (before Win2000). Can this program control drivers?
    It should work, but I would need a copy of PRONC and the installation key to try it.
    Also I have RemoteWIN but no serial key. If you have a key I can try it for you.



  12. #12
    Registered
    Join Date
    Jan 2018
    Location
    Russian Federation
    Posts
    7
    Downloads
    0
    Uploads
    0

    Default Re: Problem with ISEL. ISELDRV.EXE

    Quote Originally Posted by rc-worcs View Post
    If you have a key I can try it for you.
    Thank you, but I have not any keys. It is too expensive for me - to buy a key to try work))
    Do anybody have keys for ProNC or RemoteWIN for testing?

    Last edited by habariniv; 01-18-2018 at 04:32 AM.


  13. #13
    Member
    Join Date
    Mar 2016
    Location
    Poland
    Posts
    322
    Downloads
    0
    Uploads
    0

    Default Re: Problem with ISEL. ISELDRV.EXE

    I can't find our copy. I remember we had all the box with manual etc., but can't localise it. Sorry.
    If i will get it soon i'll reply.



  14. #14
    Registered
    Join Date
    Jan 2018
    Location
    Russian Federation
    Posts
    7
    Downloads
    0
    Uploads
    0

    Default Re: Problem with ISEL. ISELDRV.EXE

    Thanks for all. Special thanks to rc-worcs. I copied good files and mashine back to life



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Problem with ISEL. ISELDRV.EXE

Problem with ISEL. ISELDRV.EXE